Sugar: The Bitter Truth

This is well worth the time to view.

Bud push

It's not nearly time for bud break yet, but I think my baby vines are alive because the buds are starting to "push". Once daily temperatures regularly hit 50°F, and they have been, grapevines start to come out of dormancy. Left is an ultra-closeup of a bud that is enlarged and fuzzy. 5 of the vines look pretty good, which is the good news. The last one, one of the Pinot Noirs, has fewer, and smaller, buds but still shows signs of life so it'll hopefully catch up with a little extra TLC.

While I'm waiting for some exciting mini-vineyard action to happen, I'm reading From Vines to Wines by Jeff Cox. No, I won't be making wine, but there's a lot about viticulture as well as dealing with the juice, which I will be doing. I think it would be an interesting read even if you don't intend to grow vines, both because Jeff has an engaging writing style and because wine -- even if you don't personally imbibe -- plays a role in modern as well as ancient society. There are other interesting tidbits, as well: for example, I was not aware that the juice from red grapes comes out nearly clear, so the grapes are first crushed and the skins are allowed to stew with the juice for about a day so that the colors can bleed into the juice. Much of the complex flavors of wine come from the skins as well -- wines from grapes picked and directly pressed without crushing are (at least, according to Jeff, as I have no personal experience in this area) "light" and "clean" tasting, but lacking in depth of flavor. Even white grapes are sometimes often crushed and allowed to sit for 8-16 hours before pressing to enhance flavor, though like apples, white grape juice can actually turn brown from oxidation if left exposed to air for too long. For vintners (winemakers) this is not a problem as the subsequent fermentation by the yeast generally clears it up, but it will be a potential issue I will need to avoid.

In short, this whole business turns out to be a bit more complex than I anticipated, but I'm still looking forward to everything from cultivating to bottling. If anything I now appreciate the high prices for vitis vinifera juice... perhaps they really aren't gouging after all.

Corwin the viticulturist

I've been really excited about wine variety grapes for the past year or so. I'm not a big fan of the "foxy" flavor of the native North American vitis labrusca grape juice; the European wine varieties of vitis vinifera have a much more delicate and interesting flavor that I like a lot more. Problem is, I don't drink wine, and vinifera juice isn't really sold in stores. I did find a couple of places online you can get it, which is wonderful and I really enjoyed the bottles I ordered, but it's really really expensive.

I was all set to order some vinifera vines and grow my own, until I discovered Idaho has some really lame legal vine importation restrictions which meant no nurseries were willing to ship to me. And the local vinyards are not really in the business of giving half a dozen vines to anyone who asks. (And I can't start with cuttings, because they can't be grown on their own roots -- they must be grafted onto labrusca rootstock to give them resistance to the pervasive phylloxera pest.) So, I sort of despaired until we saw some grape vines for sale at Home Depot. I humored Lemontree when she wanted to look at them, knowing they'd just be common labrusca varieties like Concord or maybe Niagara, but lo and behold, they were Pinot Noir and White Reisling -- two of my favorite viniferas!! My head nearly exploded and next thing you know...


We planted three of each on the south side of our house (they really like a lot of sun). We have yet to build a trellis for them to grow on, but they're just babies so we still have plenty of time. In the meantime, they should start budding in a couple of weeks and you can bet I'll post pics as things progress. :)

Progress on the bike

Painting the tank and headlight bucket

One of the side covers Lemontree ordrered from Taiwan (only place to get them) was for the wrong bike. Our CL100 has a high exhaust, so the right side cover must be cut down to provide clearance. Here it's being marked for cutting.

Mesh reinforcement to join cut

Bondo applied

Bondo sanded smooth

Inspecting rear fender

Seat, airbox, and fender removed

Wheel and swingarm removed for frame rust removal

Pile 'o' parts

Funniest thing I've read all week

Says MarketWatch: "Now is a good time to buy stocks". Hilarious. Where do they dig up pure comedy gold like this?

I think this MW reader echoes my own thoughts on the matter:

Honda

As Corwin hinted, this is my post to make.

I bought a motorcycle! It's a bit of a fixer upper. It's also older than I am. It's not very big or very powerful (but then, neither am I-- so it's ok). It will be fun to have a life size project-- and I expect I'll learn quite a bit in the process. Corwin gets to help me figure out the wiring and stuff I'm unfamiliar with, but I'll be doing the work. It runs on a 6 volt battery (which is where his random post and strong hint for me to blog came from). It's a 1972 Honda CL100, and here are a few pictures for your enjoyment.

Fun with relays

As I mentioned in one of my older posts, some electrical relays arranged in a XOR (eXclusive OR) logic circuit can be used to turn your front turn signals into DRLs (Daytime Running Lights). On my motorcycle, I used a trailer light adapter for plug-n-play simplicity, but that won't work for an old motorcycle with a 6-volt electrical system (modern vehicles, and therefore trailer light adapters, run on 12-volts). So, here is a homebrew alternative using 6-volt relays:
Basically, it allows both lamps to light if you turn on your DRLs, or, one lamp to light if you use your turn signals, or, one lamp to stay steadily-on and the other to flash if you have your turn signal on while your DRLs are activated at the same time (the magic is in the crossed wires seen above connecting the relays together). Normally you'd need four relays for this (two for each side), but a double-pole relay reduces our parts count.

Conveniently, this same logic can let you have three brake lights. Especially on an old 6-volt bike, the brake light can be pretty dim in direct sunlight. If you use red rear turn signals (it's not legal to use amber for brake lights!), you can have all three light up when you hit the brakes, yet still allow one side or the other to flash when you turn your signal on (you'll need another set of three relays separate from your front DRLs of course). Just as DRLs increase rider safety so people ahead of you notice you, triple brakes lights similarly help protect the rider from rear-end collisions by inattentive drivers that might otherwise miss that one little dim brake light.

Now, if only we had an old 6-volt motorcycle to try this out on...

Funny name

A long time ago, we got our first digital camera and boy, did it eat batteries. Not only was it annoying, it was expensive, and as you well know -- we're cheap (uh, thrifty). Thus, I got the bright idea to get some NiMH rechargable batteries, since in my youth I had used the older NiCd rechargables to good effect in many devices.

The new NiMH rechargables have a huge edge over the now-obsolete NiCds, and that's capacity. A NiCd AA only holds about 1Ah worth of "charge", while the NiMHs hold anywhere from 2 to 2.7Ah so they last 2-3 times longer.

Since our camera was eating batteries like crazy, we got the highest capacity NiMHs we could find. We were all set, right?

Wrong. High-capacity NiMHs have this nagging little problem called self-discharge. You can charge them up but if you don't use them for a week, they're half dead. A month later, they're now useless and need recharged even though you didn't use them much, or at all! Worse, our camera's "low battery indicator" would activate after taking only a few pictures and die soon after. You see, it also turned out that NiMHs are about 1.2 volts while throwaway alkalines are about 1.5 volts. .3 doesn't sound like much but our camera was not happy about the difference.

We weren't happy, either.

This was several years ago and times have changed. Digital cameras (and other devices) are now designed to operate on both 1.2 volt NiMH and 1.5 volt alkalines, and battery makers have solved the self-discharge problem, if you know what to look for.

You can now get "LSD" or Low-Self-Discharge NiMH cells, but you have to check carefully what you're getting because the labeling is not clear. If the package says "Pre-charged" or "Hybrid" or "Lasts 6 months" or "Holds a charge for 1 year", those are LSD cells. If it isn't labeled as such, they are ordinary NiMHs and you should probably steer clear.

There's just one catch: LSD cells do not hold as much energy -- only about 2/3 as much as high-capacity NiMH... but the tradeoff is soooo worth it. The only situation where high-capacity wins is if you're charging and then totally discharging them the next day, such as a professional photographer doing a wedding or something. Otherwise, LSD is superior in every other application. And in some cases, LSD even beats throwaway alkalines! More on that later.

Though Lemontree was skeptical after our last attempt at rechargables, I put down the money for the best LSD cells available. That's where the funny name comes in: Eneloop. Yep. They're from the Japanese company Sanyo, so maybe something was lost in the translation. But in spite of the funny name, they're the best LSD for all sorts of technical reasons that would probably bore you so we'll leave it at that.

Incidentally, Duracell Pre-charged NiMHs with white tops are actually rebadged Eneloops, so if you can find them at a store they're great (Eneloops can only be ordered online). Pre-charged Duracell black-top, Energizer Hybrid, and Rayovac "4.0" are also LSD and also work fine, but are not quite as nice. I'm told Kodak also makes some LSD but I don't know what they're called.

Anyway, I have a small LED flashlight I carry in my pocket every day that takes an AA cell. With an alkaline, the brightness would start to dim within minutes as the battery was used up. With an LSD NiMH cell like an Eneloop in it though, it stays full brightness for over an hour. That's because an alkaline battery's voltage drops linearly, while NiMH voltage stays steady for most of it's lifetime. And, of course, I can feel more comfortable actually using my light instead of worrying about spending piles of money on batteries and polluting the environment with piles of batteries. Same goes for the camera, we no longer have to be stingy about using the flash so our pictures have better color saturation and are less blurry since the the camera can use a faster shutter speed.

I suspect Lemontree will remain unconvinced until we have logged more hours on the camera using the LSD cells, but Canon (who made our camera) actually says we should be able to get more pictures out of the NiMH than with alkalines (same reason my flashlight lasts longer, the voltage curve), so I remain optimistic.

So... save money, save the environment, use LSD!





...I think I just told everyone to do acid.

My Black Friday

Gray would really be a better name for it though. The whole day has been overcast and drizzly, which wouldn't be so bad except I had to spend several hours out in it using cold tools in numb hands.

Even though I just barely replaced our family car's water pump a year or two ago, and have put probably less than 10,000 miles on it since then, the pump recently developed severe incontinence. So, I got to spend Black Friday morning driving around to get coolant ("antifreeze") and a new pump; then the afternoon getting soaked alternately by the rain, the wet ground, and coolant showers.

I give Volkswagen credit for making most parts on the car relatively accessible for replacement, but one thing VW totally omitted was a drain plug for the cooling system: instead, the official procedure to drain the system is to remove the lower radiator hose. Owing to the location of the hose, you must do this laying on your back reaching above your head and since gravity is not just a good idea (it's the law), the coolant will run down the hand, arm, and into the armpit of even the most careful of mechanics who had the foresight to shield his face from the gushing slimy green torrent that results.

The bright side is I got a new tool! Any job that requires the purchase or fabrication of a new tool cannot be all bad. See, I've had this mystery bottle of coolant in my garage for some time. Because I'm cheap, I buy full-strength coolant and mix it with distilled water (this method costs about half as much as buying pre-diluted or "50/50" coolant). Unfortunately, I had opened this jug some time ago and then failed to remember if I had diluted it or if it was still full-strength (it's not good to use the wrong concentration in a car). So, for the princely sum of one dollar, I got a little eyedropper looking thing with little floaty plastic balls in it. The number of balls that float indicate the density of the fluid and therefore the coolant/water mixture; thus, the mystery was solved (full-strength, if you wondered).

The downside was I ended up with an extra washer, and one nut went missing. This however is nothing unusual, so I'm not worried.

So, that was my Gray Friday shopping spree. I think I did okay.

Last month Katie had to bring a snack to school for her class. We made some sugar cookies shaped like leaves in fall colors. Not real healthy, but in a moment of weakness, I gave in. We put them in individual baggies for her classmates, then in the treatbag she needed to return to school.

Tiffany and Katie caught the bus as usual, then I noticed Katie had forgotten the treat bag. I ate my breakfast, then drove to the school to deliver the bag. I got to the school just as everybody was lining up to go inside. Katie was so excited, as was her friend that she rides the bus with. They both were trying to talk to me at the same time. I quieted them and had Katie talk to me first. She burst out, "I knew you would come! It works! When I was on the bus I noticed I forgot my treatbag. So I did a prayer. And it works! Here you are!" Then I looked at Katie's friend who was also bursting with energy. She said, "That's what I was trying to tell you! She did a prayer and it worked!"

So, from the testimony of six year olds, prayer works! And I got to be an angel on an errand to answer a child's prayer that day.

We were out grocery shopping. It was nearing lunchtime, so I asked Emily what she'd like for lunch today. She answered, "sandwich." "Oh," I said, "what do you want on it?" "Beans. And lettuce. With my favorite bread." She took me aback a little. It sounds nice and healthy, but how do you get beans to stay between the slices of bread? And how would it taste? It got me to thinking. Should I try making bean patties or something else. I asked Emily if she'd like red beans or black beans. She declared "red."Then if she'd like them whole or mashed. She said, "mashed." We made our way to the bakery area and I let her pick out her "favorite bread," (since I had no idea what is her favorite in this particular instance). She chose whole wheat hoagie rolls.

When we got home, I drained a can of kidney beans and mashed them. I added mayo and a little mustard, thus making a concoction almost but not quite like tuna salad. I made her sandwich first. She had the beans, pickles, tomatoes and lettuce. I watched her reaction before making a sandwich for me. She was eating it! Actually eating it! I went ahead and made myself a sandwich. I have to say it was pretty good. In the meantime, Emily took some of the bean salad out and declared she didn't like it (which wasn't very surprising). However, she finished the rest of the sandwich which still had about half the beans in it.

From this experience, I have a new standby. If I can't think of something for lunch, I can now whip up some bean salad-- though for me alone, I think I'll have to add some onions and chopped pickles.

I had the opportunity today to work at the church cannery. It was a hassle to arrange for a babysitter. I also knew it would be hard work. Every time I've worked at the cannery, I have come home sore. In short, I was not looking forward to this assignment.

Canning pears was the order of the day. My job was to pick up the washed pears and place them upside down in little cones which had fingers that would grab them and insert them on a rod where they would be peeled, cored and sliced. There were three other people working with me on this job. I was at the end of the line and sometimes I had to wait for the pears to come my way. Other times I had to too many and had to make sure the conveyor belt didn't get jammed up with pears, because then they would skip out over the top and onto the floor. When a whole pear got in with the cut ones (because one of us dropped a slippery pear), a person down below in the next phase of the assembly line would throw them up to me.

Even though I didn't really want to go to the cannery today, I had fun. I got to play catch, and I got to race the machine. Both of which were enjoyable. I came home sore and tired, but it was a good day.

(500) Days of Summer

Lemontree hosted a bridal shower for some relative or another, so I hopped on my motorcycle and made myself scarce for the evening.

One of my favorite shows is "At the Movies" with Ben Lyons and Ben Mankiewicz. You may be familiar with movie critics Siskel and Ebert (Gene and Roger, respectively)? Well, these guys are their successors. Anyway, Ben and Ben gave (500) a glowing review -- and I had some free time to kill -- so even though some might consider this movie a "chick flick" I went and saw it anyway. My other choice was G.I. Joe, and while I'm sure I'll get around to watching that one eventually, I was in the mood for something with more substance and less explosions.

In a word, (500) Days of Summer is outstanding. While it falls just short of such all-time favorites as Star Trek II: The Wrath of Khan, Logan's Run, or Dune, it's right up there with the Top Ten and I will be very disappointed if it doesn't win several awards. I'm already a little miffed that I've never seen it listed on any of the streetside theater marquees -- the only way I knew it was playing in our area was by searching for it online. It might have something to do with it's "chick flick" stigma, or perhaps the short 1h 35m running time (an almost sure sign of a bad movie), or maybe it just doesn't have enough explosions.

Regardless, it's worth searching for. A word of warning, though. It is rated PG-13 for a about 60 seconds of "adult" content. Said content was actually relevant to the storyline though and not just thrown in to bump the rating up to get more viewers, unlike some movies I could mention *cough*Titanic*cough*. I don't know that I can go so far as to say it was tastefully done, but it has to be one of the least explicit scenes in any PG-13 movie, ever (uh, I still wouldn't let my kids see it).

Anyway, the movie is sometimes billed as a "romantic comedy"; it is nothing of the sort. Sure, there's some romance, and yes, there's some comedy, but (500) has as much in common with Sleepless in Seattle or You've Got Mail as I have in common with Rosanne Barr (in short, nothing). I can't even call it a chick flick because there's plenty here for guys to enjoy (I can only assume the girls will like it as well). It's got a nonlinear timeline and it has some unusual film techniques, but these odd devices all just click and work together. There was only one scene in the whole movie I found fault with, and that was just because it ran 10 seconds too long (I think because they wanted the music to swell). Really, that's just nitpicking and I couldn't find anything else to complain about.

Due to the nonlinear timeline, you might fear that the movie's ending is known well before the end of the show. Worry not, for there are some twists. I cannot say more without spoilers.

In short -- grab your spouse or girlfriend and get to the theater, for there's actually a movie worth paying the exorbitant ticket price for.

It's gone

We had some good times, though.

Today I sold my old motorcycle. It was with mixed emotions, a little sadness, but mostly satisfaction. We had a good run. It was a humble bike, but it served me well... and it's not like I'll never see it again: I sold it to our next-door neighbor. Apparently he used to ride "back in the day" but some of his buddies wrecked, so he swore off them for 20 years or so. I guess SMAS (Sudden Motorcycle Acquisition Syndrome) is infectious though, because he seemed to change his mind and want one after seeing me get a new (well, not factory-new, but new to me) bike.

I was going to repaint it black, since I had a bunch of black paint laying around, but he wanted metallic blue so he bought the paint and I painted it to order.

Ironically, when I bought the bike, it was a flat primer black and I wanted to paint it metallic blue. I even painted the side covers blue but never got around to painting the tank. So, it somehow seems appropriate that right after I finally painted it the right color 9 years later, I immediately sold it. Actually, part of my reason for never painting it was to leave it a little... well, not ugly, but uh, homely. The theory was to make it less attractive to thieves, but really, I think it was mainly because I kind of liked the "ratbike" look, as if it was something out of a post-apocalyptic movie (my favorite kind of movie).

Anyway, the tank was a little dinged up and the empty mounting points for the "Yamaha" logo looked pretty stupid (the "Yamaha" badges having fallen off long ago). So, I got a chance to do a Bondo job for the first time. (For those of you not acquainted, Bondo is a two-part putty-like dent filler that you heap over the dent, then sand smooth to match the metal surface.) The tank still isn't perfectly smooth but from 5 feet it looks pretty good for my first try.

Lemontree also found a "dent puller" tool at a thrift store which came in handy. It only works for large, shallow dents, but the tank had one like that and it worked great. You use a hot glue gun to glue what's basically a big screw the middle of the dent, then you use a handle on the screw to pull the dent out. I was skeptical the hot glue would hold, but it did great, and was easy to remove by peeling instead of pulling. Thanks, Lemontree!

I had purchased the bike at around 19,000 miles, and it was at 23,997 when I got the new bike. So today, I went around the neighborhood a few times until it rolled over 24,000.0 exactly.

Here's the crazy part... I sold it today for $100 more than what I paid for it in 2000. Whoever says that motorcyles depreciate is wrong! Actually I think I just got a really good deal when I first bought it. And I have upgraded a lot of things on the bike so my asking price was more than a fair (and still less than the Blue Book). The neighbor still got a deal, I think.

I'll miss the old bike, but only a little. At least I know it has a good home.